Ranges, Stoves

A Stove is a self-contained heating appliance which heats one space, either the individual room-space it is in (as with heating stoves), or just its own space (as with a cooking stove). more...

Home
A/V Accessories & Cables
DVD & Home Theater
Gadgets & Other Electronics
Heating, Cooling & Air
Home Audio
Lamps, Lighting, Ceiling...
Major Appliances
Dishwashers
Other Major Appliances
Ranges, Cooking Appliances
Accessories & Parts
Cooktops
Electric Cooktops
Gas Cooktops
Other Cooktops, Ovens,...
Ovens
Electric Ovens
Gas Ovens
Range Hoods
Ranges, Stoves
Electric Ranges
Gas Ranges
Other Ranges, Stoves
Refrigerators, Freezers
Washers, Dryers
Outdoor Power Equipment
Satellite, Cable TV
Televisions
Vacuum Cleaners &...

Stoves may be an improvement on open fires in that they are easier to control, more efficient and create less pollution.

Efficiency

Open fire has three major disadvantages that prompted inventors even in the 16th century to devise improvements: it is dangerous, it produces much smoke, and the heat efficiency is poor. Attempts were made to enclose the fire to make better use of the heat that it generated and thus reduce the wood consumption. A first step was the fire chamber: the fire was enclosed on three sides by brick-and-mortar walls and covered by an iron plate. Only in 1735 did the first design that completely enclosed the fire appear: the Castrol stove of the French architect François Cuvilliés was a masonry construction with several fireholes covered by perforated iron plates. It is also known as a stew stove. Near the end of the 18th century, the design was refined by hanging the pots in holes through the top iron plate, thus improving heat efficiency even more.

In order to prevent air, and therefore smoke, from spilling back into the room a large updraft pulling air (and therefore heat) out of the chimney is needed. This both pulls heat away and pulls air from the rest of the house into the fire and then up the chimney. A fireplace consumes 200 to 600 cubic feet of air per minute, more for a very large fire. Even a mostly closed-off fireplace, for example a modern fireplace with glass doors closed, will use 50-150 cubic feet per minute. High airflow creates a draft which pulls heated air out of the house to be replaced with cold air leaking in from the outside. Second, in an open fire some of the combustible gas coming off the wood escapes and thus does not ignite and is lost. By controlling the inflow of air to allow only what a fire needs to burn, modern stoves can reduce the consumption of air to as little as 15-30 cubic feet per minute, though consumption varies.

Modern stoves also increase the completeness of combustion by capturing most of the heat from the combustion and exhaust through an extended system of flues inside a large thermal mass before the exhaust is vented to the outside air. More expensive stoves use a catalytic converter which causes combustion of the gas and smoke particles not previously burned. Other models use a design that includes firebox insulation, a large baffle to produce a longer, hotter gas flow path and pre-heating the air prior to its entering the combustion chamber. Modern enclosed stoves are often built with a window to let out some light and to enable the user to view progress of the fire. Glass or semi-translucent manufactured mica are common window materials.

Read more at Wikipedia.org